Open the Surfboard Name file in Xtool Creative and you will have the bookmark design.

1. The name is changed and the font style can be changed if desired.
2. The red layer is hidden so that the name can be added to the design.
3. The name is placed on the surfboard design and the subtract option is used.
4. Then the red layer is made visible again and the design can be made on the laser machine.

The file is set for 3mm Basswood Plywood with Triangular Prism.

The cut layer is red and is set for Xtool M1 10W, you can change this option depending on the machine. You can also modify the parameters depending on the material as plywood, acrylic, leather, or any other material you have available

You can use the file speed of 120mm/s or set it slower for a deeper engrave.

You can experiment with different settings to achieve your desired finish.