HomeTemplatesTools & Special MaterialsGadgets
georgeparisonline
Report
Laser cut and engrave
Project made with xTool S1 machine for Laser cut and engrave.

Xtool S1 Module Handle

Instruction
xtools1_modulehandle.xcs
xtools1_modulehandle
.xcs
Application scenario
Laser processing
Machine & module
xTool S1
40W
Material used
2.5mm green acrylic
189
1308
Information
      Move the Xtool S1 Laser module without directly touching the module using 2.5mm acrylic and double sided-tape
Instruction
1
Step1
Preview
Preview
Preview
2 More images

Acrylic thickness = 2.5mm.

Overall project dimension = is 72.26mm Width x 30mm. Height

Machine use= Xtool S1 with 40W Diode Laser Module

  1. Score the Internal Border: Power= 80 Speed=175 Pass=5
  2. Engrave the texts: Power=94 Speed=4 Pass=1
  3. Cut the circle: Power=94 Speed=4 Pass=1
  4. Cut the outside border: Power=94 Speed=4 Pass=1
  5. Put heavy duty double-sided tape (3M) at ½ portion of the back
  6. Attached to the top of the left side metal black frame

Note: Power and speed settings may differ depending on laser module and materials used

 

Comments
Remixes
xTool Supplies Used in This Template
xTool S1
xTool S1

License

CC BY-NC-ND