Import the XCS file into the software and confirm the dimensions, processing position, and processing mode. Note: The file in this case uses 3mm basswood plywood and A4 printing paper. If the type and thickness of the material you choose are different, please adjust the laser processing parameters and file size according to the actual material. 

Place the 3-mm basswood plywood into the P2 processing area, and make sure the material is flat. Then select the honeycomb panel processing mode, and perform fill carving and line cutting operations in sequence with different parameters. Arrange the layout for processing according to the actual situation of the material. Note: The processing parameters marked here are the officially recommended parameters for 3-mm basswood plywood. If you prefer different effects, please adjust them manually. 

Use wood glue to assemble the parts made of 3mm basswood plywood. Use double-sided tape to stick all the A4 papers together, then roll them up around a straw and put them into the assembled TV set.