Set up the conveyer feeder. Insert the board horizontally into the machine, align the grid, and adjust the pressure roller until the color on the roller turns red.

Learn how to set up: https://support.xtool.com/article/1119

Import the file into XCS, select the conveyor feeder mode, move the pattern to the cutting area, adjust the size of the pattern, set the parameters, and start cutting.

Stick the wood parts, and connect the metal balls and rings with a wire. Pass two ends of the wire through the top of the wooden board and then tie the grip ring.

Before engraving, ensure that the material is properly aligned with the grid to prevent any deviations during the engraving process.

Make sure to press the pressure roller tightly onto the wooden board to prevent any slipping during feeding.

Finally, remember to fix the assembly with a bolt once completed.