Report
![[Laser cut and engrave] Bookmark Surfboard with waves and birds design](https://image-res.xtool.com/resource/xtool/community/attachment/xtool-community/4317ae8f-3f33-4d6b-9720-203dac52e8e2?x-oss-process=image/resize,w_1200,h_900,limit_0/interlace,1/format,webp/auto-orient,1)
Bookmark Surfboard with waves and birds design
InstructionSurfboard
.xcs
Application scenario
Laser processing (10min)
Machine & module
xTool M1
10WCompatibles · 11
Material used
1/8"(3mm) Basswood Plywood
86
411
Information
Wooden surfboard bookmark with wave and seagull design. Made with 3mm bassewood plywood in Xtool M1
Instruction
1
Step1: Design
Preview
Open the surfboard file in Xtool Creative and you will have the bookmark design.
2
Step2: Cutting Setting
The file is set for 3mm Basswood Plywood with Triangular Prism.
The cut layer is red and is set for Xtool M1 10W, you can change this option depending on the machine. You can also modify the parameters depending on the material as plywood, acrylic, leather, or any other material you have available
3
Step3: Engraving settings
You can use the file speed of 150mm/s or set it slower for a deeper engrave.
You can experiment with different settings to achieve your desired finish.
Comments
