Report
![[Laser cut and engrave] Quirky wooden robot-shaped storage box with decorative items](https://image-res.xtool.com/resource/xtool/community/attachment/xtool-community/1ded8cf5-0261-4c01-a065-9b9391f32259?x-oss-process=image/resize,w_1200,h_900,limit_0/interlace,1/format,webp/auto-orient,1)
drawers akimbo
InstructionCabinetakimbo
.xcs
Application scenario
Laser processing (60min)
Machine & module
xTool S1
20W
xTool D1
20W
xTool P2
55W
xTool P2S
55W
xTool M1
10WCompatibles · 9
Material used
3mm Black Walnut Plywood
3mm Basswood Plywood
1338
10447
Information
The drawers akimbo are both cute and practical. They can be placed on the table to store some small items. The cutting size is suitable for 30x30mm wooden boards. Using 30x60mm will save more wooden boards.
Instruction
1
Step1
Preview
STEP 1.Import the XCS file
Start the machine, open the xTool Creative Space on the computer, drag in the required XCS file, adjust the parameters.Put in the planks and start cutting.
2
Step2
Preview
Preview
Apply wood wax oil to the wood board to add texture
3
Step3
Preview
Preview
Preview
10 More images
You can assemble the two drawer parts first，Assemble according to the steps shown in the picture. If the socket is too tight, you can use a hammer to hammer it in, which will make it stronger. Use glue to fix the loose parts.
4
Step4
Preview
Preview
Preview
2 More images
Assemble according to the steps shown in the figure and install the outer frame. Be sure to glue it firmly.5
Step5
Preview
Preview
Preview
Paste decoration
Comments
