Report
OldChurchwithStainGlassWindows
Instructionchurchshadowbox
.xcs
Application scenario
Laser processing (90min)
Machine & module
xTool P2S
55WMaterial used
3 mm eco white
12"x12" shadow box
fairy lights
0.01 transparent acrylic
wrapping paper
20
322
Information
Church and trees are cut from 3mm pre painted white eco board, but it can also be made on unfinished wood and finish it as you like. Stain glass windows and some of the Christmas trees are made out of 0.01 flex acrylic and then lit up with fairy lights. The background ground is hand painted. Shadow box and fairy lights are purchased from a craft store.
Instruction
1
Step1: Prepare shadow box , open shadow box,paint background as desired using acrylic paint and attach it to the shadow box..
Preview
Prepare paint shadow box.
Open box, paint background as desired using acrylic paint or paint markers. Be sure background is secured to the back of the shadow box.
2
Step2: Use laser to cut 3mm wood. Wood items are on the left side. Pl
Preview
All items on the left side should be cut out of 3 mm wood. My settings with P2S were power 64, speed 12, repeat 1. Clean wood with a damp cloth.
3
Step3: use laser to cut acrylic 0.01
Preview
Use laser to cut acrylic 0.01 transparent (items on right of file). Settings for P2S Power 60 speed 14 repeat 1.
4
Step4: Assemble trees & church
Preview
Use glue to assemble trees and church as pictured.
String fairy lights from back side of shadow box and glue them to area where the stain glass windows, and transparent trees will be placed. Next attach the church and trees. Then re-assemble shadow box. Cover battery box with wrapping paper if desired. Enjoy!
Comments
Remixes
xTool Supplies Used in This Template