HomeTemplatesDecorHome DecorShelves & Holders
CarvingCreatives IG
Report
Laser cut and engrave
Project made with xTool S1 machine for Laser cut and engrave.
Project made with xTool S1 machine for Laser cut and engrave.
Laser cut and engrave
Project made with xTool S1 machine for Laser cut and engrave.
Laser cut and engrave
Project made with xTool S1 machine for Laser cut and engrave.
Laser cut and engrave
Laser cut and engrave
Laser cut and engrave
Laser cut and engrave
Laser cut and engrave
Laser cut and engrave

Leather tray with Spartan Design

Instruction
LeatherTray.xcs
LeatherTray
.xcs
Application scenario
Laser processing (20min)
Machine & module
xTool S1
20W
Compatibles · 8
Material used
Brown to Black Laserable PU Leather
44
628
Information
      Leather catch all tray- Used some DesginFind points to get some new material. This tray turned out great and can be found here: https://www.xtool.com/collections/material-leather/products/brown-to-black-laserable-pu-leather-tray-1pcs
Instruction
1
Step1

Insert material onto honeycomb Panel. This leather tray is from the Xtool materials page. 

2
Step2

Unsnap the clips and flaten out the tray, Mark your working area with the rectangle option, use the fold lines as the perimeter. 

3
Step3

Verify the correct settings for your machine. I ran this project on the S1-20W. Feel free to adjust the power and speeds to your liking.  I found 35 power and 225 speed. Stucki bitmap and 100 lines per cm. 

4
Step4

Run the project,around 15-20 minutes depending on the name you enter. I input enter custom name so you can adjust to you or your client needs. 

5
Step5

Remove the project and snap the clips together. 

6
Step6

Set on your nightstand to store all your goods straight from your pocket to the catch-all tray. 

Comments
Remixes
xTool Supplies Used in This Template
xTool S1
xTool S1
Brown to Black Laserable PU Leather
Brown to Black Laserable PU Leather

License

CC BY