This set of 4 cross designs include options to hang on your wall or 2 different options to display on a stand wherever you like. Learn all about them under the Project Details tab above!

THERE ARE 3 SUPPORT VIDEOS IN THE LISTING BELOW, SO BE SURE TO CHECK THEM OUT! NOTES:

All 4 cross designs include the option to hang on the wall via holes in the back layer, a layered slotted stand, and an elevated display stand as well.

See all support videos and ReadMe docs in the download folder for more info!

Unbranded marketing photos included in download folder
 

FILE FORMATS:
Ai
SVG
PDF
DXF
EPS
 

MEASUREMENTS:
All 4 cross designs are approximately 10.5" tall and 6.5" wide when not on a stand.
The elevated display stand adds 1"-3" to the height, depending on where you put the bracket on the back of the cross
The slot sizes are 0.125" and the tabs that go into the base slots are 0.25" long
 

MATERIALS I USED:
We made versions with 1/8" MDF and other versions with 1/8" prefinished plywoods from GS2Awards.com and HoustonAcrylic.com
We use Rustoleum Filler Primer and Montana 94 spray paints. Check out Montana 94 Spray Paints here! --> https://sprayplanet.com/bbld
Gorilla Glue Super Glue Gel
 

AMOUNT OF MATERIAL NEEDED:

Less than 1 sheet of 11" x 19" material for each cross if hanging or using the layered base. Slightly more material needed if using the elevated display holder.