Report
![[Laser cut and engrave,Blade cut,Inkjet printing] Hand holding snowflake Christmas decoration with sequins](https://image-res.xtool.com/resource/xtool/community/attachment/xtool-community/0f24290c-93a1-4461-8535-c84bfdcb24c2?x-oss-process=image/resize,w_1200,h_900,limit_0/interlace,1/format,webp/auto-orient,1)
Christmas Shake Window
Remix
InstructionShakeWindow
.xcs
Application scenario
Laser processing、Blade cut、Inkjet printing (30min)
Machine & module
xTool M1 Ultra
20WAccessories
xTool M1 Air Assist Set
xTool M1 Baseplate
Material used
1/8"(3mm) Basswood Plywood
46
870
Information
A little shake window for all snow lovers.
My Idea for ChristmasShakerRemix.
If you leave out printing, all other xtool machines should be able to handle this project ;)
This remix is based on
Christmas Crystal Ball Shaker
DesignFind
Christmas Candy Jar Shaker
DesignFindInstruction
1
Step1: Print and Cut
- Use the base plate and the Triangular Prism Holder. Place your plywood on the holder and secure it from slipping (for example with adhesive tape).
- Control all settings and adapt them to your needs.
- Start the process.
Tip: For printing use smooth and good quality wood, so your ink doesn't dry out in the process.
2
Step2: PVC cut
- Prepare for cutting
- use light grip cutting mat
- start process
3
Step3: Glue
- On each Windowframe, glue on sheet of your PVC
- Let everything dry
- Add the middle frame to a window and let this dry too
- Now fill your shake decoration into the window with the attached middle frame.
- Glue everthing together and let it dry
- make sure you have always the right side up!
Tip: Have fun and add some more decortion! :)
Comments
