Snowflake Tealight Holder with epoxy
Instruction
Welcome back to Magic Laser Crafts! 🎄✨ In today’s tutorial, I’ll show you how to design and create a beautiful snowflake tealight holder using the xTool M1 laser cutter. This elegant Christmas ornament doubles as a cozy candle holder, perfect for adding a festive, warm glow to your holiday décor. Whether you’re a beginner at laser crafting or an experienced maker, this project is both simple and rewarding.
Using xTool Creative Space, I’ll guide you through every step—from setting up the snowflake design to cutting your chosen material (such as 3mm plywood) with precise settings. Discover how to optimize the xTool M1 for clean cuts, crisp engravings, and a stunning final piece. Plus, get tips on painting, finishing, and personalizing your tealight holder so it matches your Christmas aesthetic.
Begin by importing your snowflake tealight holder design into xTool Creative Space. Adjust the layout as needed and ensure all elements fit properly on your chosen material (e.g., 3mm plywood).
For a detailed step-by-step tutorial, check it out on YouTube - HERE
For this project, you’ll be performing only one type of operation—cutting the pieces. Set the power, speed, and number of passes according to the recommended settings for your material. Once you’re satisfied with the parameters, start the cutting process and carefully remove the finished pieces.
After cutting, test-fit the pieces to ensure they slot together correctly. Once you’re happy with the fit, paint the pieces with acrylic paint. Apply two coats for a rich, even color. While the final coat is still slightly wet, sprinkle on some glitter to add a festive sparkle. Let it dry completely, then apply a thin layer of epoxy to seal in the glitter and give your tealight holder a glossy, professional finish. Allow the epoxy to cure thoroughly before proceeding.
⚠️ Safety Warning: When working with epoxy, always follow safety precautions! Wear gloves to protect your skin and work in a well-ventilated area or use a mask to avoid inhaling fumes. Be sure to read the manufacturer's instructions carefully and avoid direct contact with the resin. Properly dispose of any used materials and clean your workspace thoroughly after use. Safety first! 😊
With the epoxy cured and the pieces fully assembled, your sparkling snowflake tealight holder is ready! Place a tealight inside and enjoy the warm, festive glow this handmade decoration brings to your holiday décor.