Report
![[Laser cut and engrave] Wooden reflector lamp](https://image-res.xtool.com/resource/xtool/community/attachment/xtool-community/f70adcdc-8a13-427f-8efd-1e65085f12e2?x-oss-process=image/resize,w_1200,h_900,limit_0/interlace,1/format,webp/auto-orient,1)
Wooden reflector lamp
InstructionWoodenreflectorlamp
.xcs
Application scenario
Laser processing (110min)
Machine & module
xTool S1
40WCompatibles · 11
Material used
1/8"(3mm) Basswood Plywood
538
4993
Information
Wooden reflector light, the light is softly diffused after being reflected by the wooden board, creating a warm and delicate atmosphere by utilizing the transparency and natural texture of the wood itself.
Bill of Materials
xTool parts
1/4" Basswood Plywood Sheets (4pcs)/44111
x1
* Currently only available in US store
Instruction
1
Step1: Import the XCS file
Preview
Start the machine, open the xTool Creative Space on the computer, drag in the required XCS file, adjust the parameters.
2
Step2: Apply masking tape
Preview
Before cutting, apply masking tape to one side of the wooden board to ensure that it remains clean even after cutting.
3
Step3: Cutting
Preview
Preview
Preview
Preview
Place the necessary consumables, measure the distance, refresh the background, and drag the pattern onto the consumables. Attention: The side of the wooden board with the masking tape facing downwards.
4
Step4: Clean the masking tape
Preview
Preview
After cutting, tear off the masking tape on the back of the wooden board.
5
Step5: Assemble
Preview
Preview
Preview
Preview
Assemble the various parts of the lamp and fix them with glue. Pay attention to the arrangement of wood chips and complete the assembly according to the instructions in the diagram.
6
Step6: Install a light bulb
Preview
Preview
Preview
4 More images
Now, you can install the light bulb and turn on the light to see the effect.
Comments
