Report
![[Laser cut and engrave] Welcome sign with pinecones and Christmas Trees](https://image-res.xtool.com/resource/xtool/community/attachment/xtool-community/4f9807da-79ac-42bc-aafc-c5010b17158f?x-oss-process=image/resize,w_1200,h_900,limit_0/interlace,1/format,webp/auto-orient,1)
Welcome sign with pinecones and Christmas Trees
Instruction12
.aPineConeMerryChristmas
Application scenario
Laser processing (60min)
Machine & module
xTool P2
55WCompatibles · 8
Material used
1/4"(6mm) MDF
1/8"(3mm) MDF Board
66
453
Information
I made this holiday sign for a craft fair. It was a quick project; the top layer's cutting time was 16 minutes. The project is sized for a 16-inch round base, so Canvas 2 has a puzzle piece round in case you need it.
Instruction
1
Step1: Cut the words and shapes
Preview
Preview
I cut the pinecone bottom and the “WELCOME” word on one 19X12 3mm MDF board. I used a spare piece of MDF to cut the strip of pine trees.
2
Step2: Paint and glue together
Preview
I painted the base dark brown and after that dried, I repainted the base tan and used a wood graining tool for a natural wood effect.
The top layer pieces were painted with a small paint roller in cream, red and green acrylic paint (2 coats).
I finished the project by spraying it with a coat of clear acrylic paint (satin).
Comments
