Report
![[Laser cut and engrave] Wooden airplane model on concrete surface](https://image-res.xtool.com/resource/xtool/community/attachment/xtool-community/cff31f67-a088-4dc9-8af5-e1fac33f2a93?x-oss-process=image/resize,w_1200,h_900,limit_0/interlace,1/format,webp/auto-orient,1)
F22SimplePuzzle
InstructionF22Cardw:standv2
.xcs
Show 2 more
Application scenario
Laser processing
Machine & module
xTool D1
10WAccessories
xTool Honeycomb Working Panel Set for D1 Pro/D1
Material used
2mm Basswood
137
958
Information
My kids love the simple plane puzzles but I could never find a good free one for the F22 so I made my own. Very simple and makes a great puzzle to throw in goodie bags. Kids love them and they are easy enough my 5 year old had no problem with them.
Note: The stand was a concept design, it kinda worked but isn't great.
SVG provided if using alternate software. XCS provided more for reference. I don't use my D1 with XCS so please note settings are for D1 10W not for S1 40W.
Instruction
1
Step1
To build the plane:
- Insert Horizontal Stabilizer Holder (part 1) into slot 1 on the plane cutout (reach section of plane).
- Slide cockpit section part 2 into slot 2 on the plane. this should lock the horizontal stabilizer holder (part 1) in place.
- Insert the two stabilizers (part 3 x 2) into the stabilizer holder (part 1). Please note, the stabilizers do have a etching setting. This trims off a small portion of the bottom edge and allows the for angled design. This can also be achieved with light sanding of that edge.
To build the stand:
- Insert upright holder labeled “Stand” into rectangular slot in the stand base.
- Insert single disc holder into the top of the upright holder. This allows for the plane to be aligned same direction as the upright. This disc can be rotated to provide different angles of attach (within reason based on weights).
- Additional disc provided to turn the plane 90 degrees.
- Insert plane into the slot on the disc.
Comments
