HomeTemplatesDecorSeasonal & Themes DecorHolidays Decor
diy.vbusiness
Report
Laser cut and engrave
Project made with xTool S1 machine for Christmas.
Project made with xTool S1 machine for Christmas.
Laser cut and engrave
Project made with xTool S1 machine for Christmas.
Laser cut and engrave
Project made with xTool S1 machine for Christmas.
Laser cut and engrave
Project made with xTool S1 machine for Christmas.
Laser cut and engrave
Project made with xTool S1 machine for Christmas.
Laser cut and engrave
Project made with xTool S1 machine for Christmas.
Laser cut and engrave
Laser cut and engrave
Laser cut and engrave
Laser cut and engrave
Laser cut and engrave
Laser cut and engrave
Laser cut and engrave
Laser cut and engrave
Laser cut and engrave

A tray of sweet Santa (slate tray)

Instruction
ardoisenoel02.xcs
ardoisenoel02
.xcs
Application scenario
Laser processing (90min)
Machine & module
xTool S1
40W, 2W
Compatibles · 10
Accessories
xTool S1 1064nm Infrared Laser Module
xTool S1 Honeycomb Panel
Material used
Rock Coaster
52
332
Information
      A tray of sweets Santa with lot of gifts (slate tray).

I used this slate : https://www.action.com/fr-be/p/3002322/plateau-ardoise-absolu-chic/
Instruction
1
Step1: Start you xTool Creative space

Start XCS

2
Step2: Open project

Go to Files -→ open project

3. select ardoise noel 02.xcs in your drive

 

3
Step3: Select french or English

 

 

 

 

 

4
Step4: place slate tray into the machine

place slate tray into the machine

 

5
Step5: set focus

Set Focus

 

 

6
Step6: Check Parameters

Check parameters - I used the predefined parameters by selecting Rock Coaster.

 

7
Step7: Start Engraving

Start Engraving

 

 

 

 

 

8
Step8: remove from machine

remove from machine.

 

 

 

 

Comments
Remixes
xTool Supplies Used in This Template
xTool S1 1064nm Infrared Laser Module
xTool S1 1064nm Infrared Laser Module
xTool S1 Honeycomb Panel
xTool S1 Honeycomb Panel
xTool S1
xTool S1
Rock Coaster
Rock Coaster

License

CC BY-SA