HomeTemplatesDecorHome DecorShelves & Holders
Atomm
Report
Laser cut and engrave
Project made with xTool P2 machine for Laser cut and engrave.
Project made with xTool P2 machine for Laser cut and engrave.
Laser cut and engrave
Project made with xTool P2 machine for Laser cut and engrave.
Laser cut and engrave
Laser cut and engrave
Laser cut and engrave
Laser cut and engrave
Laser cut and engrave

F1 Adjustable Height-Increasing Bracket

Instruction
F1Adjustableheightincreasingbracket(1).xcs
F1Adjustableheightincreasingbracket(1)
.xcs
Application scenario
Laser processing (15min)
Machine & module
xTool P2
55W
Compatibles · 9
Material used
3mm Basswood Plywood
240
2227
Information
      The consumables are too large to fit into it, let's try making an adjustable height stand.
Instruction
1
Step1: Import the XCS file
Preview

Start the machine, open the xTool Creative Space on the computer, drag in the required XCS file, adjust the parameters.
2
Step2: Cutting
Preview
Preview
Preview

Place the necessary consumables, measure the distance, refresh the background, and drag the pattern onto the consumables.
3
Step3: Paste
Preview
Preview
Preview
Preview

Stick each layer together with glue. Pay attention to the direction of the four support legs of the shelf, and paste them in the two orders shown in the picture.
4
Step4: Assemble
Preview
Preview
Preview
Preview

Assemble the various parts of the shelf and fix them with glue.
Comments
Remixes
xTool Supplies Used in This Template
xTool P2
xTool P2
3mm Basswood Plywood
3mm Basswood Plywood

License

CC BY-NC-SA