![[Laser cut and engrave] Small Parts Catch Tray](https://image-res.xtool.com/ali-res/community/making/b2de0a4d-b28d-4bf3-b637-2f433b0d034f/WhatsApp%20Image%202023-10-22%20at%2011.48.29%20AM.jpeg?x-oss-process=image/resize,w_1200,h_900,limit_0/interlace,1/format,webp/auto-orient,1)
Small Parts Catch Tray
Instruction
Information
So as many of us have done I am sure your take small screws or small parts for the projects we are working on so I made this to keep a hold of small parts.
Instruction
Step1: the design
So I made a double of the image then on one of them I made an outline so that it would have two lines on the XCS software. this will be the top layer pro tip make it larger than you want it to be at first you will scale it later so you can see it better.
Step2
So the outside of the first layer can be copy and pasted onto the screen making the bottom layer this will only be one though not a double. and then you can add the engraving if you want.
Step3
Now that it is cut out I used some high strength wood glue to put them together and a paper towel to wipe up the excess. after it drys it is done. I made two of these on one of them I put a high strength magnet on the bottom to hold metal parts the other is for wood parts if you want it deeper you could even double up the top layer.