Report
![[Laser cut and engrave] Baby it's cold outside decorative sign with snowflakes](https://image-res.xtool.com/resource/xtool/community/attachment/xtool-community/e52a12c7-783e-4ea4-9552-18c49bcb5c30?x-oss-process=image/resize,w_1200,h_900,limit_0/interlace,1/format,webp/auto-orient,1)
Baby it's cold outside decorative sign with snowflakes
InstructionBabyItsColdOutside2024Edition
.xcs
Application scenario
Laser processing (60min)
Machine & module
xTool P2
55WCompatibles · 8
Material used
1/4"(6mm) MDF
1/8"(3mm) MDF Board
41
436
Information
I made this holiday sign for a neighbor to give as a gift.
Instruction
1
Step1
Preview
All the words and shapes will fit on one piece of 19X12 MDF but you will need to make several separate cuts and move the board in the laser bed to use the entire area of the board.
2
Step2: Paint and Glue
Preview
Acrylic Paint - 2 Layers on each piece (Sherwin Williams quart samples are $10ish)
This project could also be painted with acrylic spray paint but I like to keep the cut edges black when possible.
Glue - Starbond thick (Amazon)
Finish with a spray-on coat of clear acrylic or lacquer to help with durability for outdoor projects.
Comments
