There really is not much to the completion of this project. Simply cut the vinyal using the provided settings. We have our cut pressure set to 110 as this is the setting we have found provides the most success. 

After cutting - WEEDLE - remove the unwanted areas; the border around the sticker helps to remove the negative space. weedling is not fun, but it must be done.

once satisfied with weedling, cover the vinyl with transfer paper.

One step that is important  is to fully press the transfer paper down in order to ensure that the vinyl sticks to it.

Seperating the transfer paper with vinyl backing is easy, if you go slow, and pull at a 90 degree angle. We have better success by putting the tranfer paper down on hard surface, and working the vinyl backing off, again slowly pulling. if the vinyl contunies to stick the its backing, ease the backing down - and rub the backing a little, and try again.

Ensure the surface you intend to put the sticker on is clean first; if on window denatured alchohol works great.