HomeTemplatesDecorSeasonal & Themes DecorHolidays Decor
LaserBuildLab
Report
Laser cut and engrave
Project made with xTool S1 machine for Christmas.
Project made with xTool S1 machine for Christmas.
Laser cut and engrave
Project made with xTool S1 machine for Christmas.
Laser cut and engrave
Project made with xTool S1 machine for Christmas.
Laser cut and engrave
Project made with xTool S1 machine for Christmas.
Laser cut and engrave
Project made with xTool S1 machine for Christmas.
Laser cut and engrave
Project made with xTool S1 machine for Christmas.
Laser cut and engrave
Project made with xTool S1 machine for Christmas.
Laser cut and engrave
Project made with xTool S1 machine for Christmas.
Laser cut and engrave
Project made with xTool S1 machine for Christmas.
Laser cut and engrave
Laser cut and engrave
Laser cut and engrave
Laser cut and engrave
Laser cut and engrave
Laser cut and engrave
Laser cut and engrave
Laser cut and engrave
Laser cut and engrave
Laser cut and engrave
Laser cut and engrave
Laser cut and engrave
Laser cut and engrave

Christmas Ornament with moon and snowman

Instruction
ChristmasOrnamentwithmoonandsnowman.xcs
ChristmasOrnamentwithmoonandsnowman
.xcs
Application scenario
Laser processing (20min)
Machine & module
xTool S1
20W
Compatibles · 8
Material used
3mm MDF Board
180
779
Information
      Create a magical Christmas ornament with this intricately designed laser-cut file. Featuring a whimsical moon and snowman, this 3D ornament is sure to bring joy to any home. Customize with your favorite colors and add a touch of glitter or sparkle for a truly one-of-a-kind decoration.

Measures 86 х 96 mm.
Design for Thickness: 3mm.
Recommended Materials: Plywood, MDF, Acrylic, Plexiglass.

For your convenience, the downloadable zip folder contains files of different formats such as: .AI, .SVG, .DXF, .DWG, .CDR, .EPS, .lbrn2, .PDF and .XCS formats.
Instruction
1
Step1: Using xTool Creative Space
Preview

Switch on the machine, open xTool Creative Space on your computer, drag in the required xcs file, 300*600*3mm MDF board into the machine, refresh the page, click on ranging, adjust the parameters, and get ready for cutting. When using the S1 machine, you need to turn on the air pump to prevent the board from yellowing and discoloring during laser cutting.

RED LAYER

  1. Make sure you opened "Layer and Object List” by clicking on the Icon on the bottom left of the screen.
  2. Select the red layer (this layer contains the path for engraving).
  3. Set the processing type of the red layer to Engrave. 
  4. Click on “EasySet panel” to open the power and speed settings for the selected layer.
  5. Set the Power (S1-20w: 60) 
  6. Set Speed (S1-20w: 180) 
  7. Set Number of Passes (S1-20w: 1)
  8. Line per cm (S1-20w: 120)

BLACK LAYER

  1. Make sure you opened "Layer and Object List” by clicking on the Icon on the bottom left of the screen.
  2. Select the black layer (this layer contains the path for cutting).
  3. Set the processing type of the black layer to Cut. 
  4. Click on “EasySet panel” to open the power and speed settings for the selected layer.
  5. Set the Power (S1-20w: 100) 
  6. Set Speed (S1-20w: 8) 
  7. Set Number of Passes (S1-20w: 1)
2
Step2: After cutting
Preview

After cutting, we have several elements in each toy. 

You just need to assemble them as shown in the video.

3
Step3: Done
Preview

Now you can enjoy the wonderful atmosphere of the Christmas Ornament.

Comments
Remixes
xTool Supplies Used in This Template
xTool S1
xTool S1
3mm MDF Board
3mm MDF Board

License

CC BY-NC