HomeTemplatesDecorSeasonal & Themes DecorHolidays Decor
Atomm
Report
Laser cut and engrave,Pen drawing
Project made with xTool P2,xTool S1 machine for Christmas.
Project made with xTool P2,xTool S1 machine for Christmas.
Laser cut and engrave,Pen drawing
Project made with xTool P2,xTool S1 machine for Christmas.
Laser cut and engrave,Pen drawing
Laser cut and engrave,Pen drawing
Laser cut and engrave,Pen drawing
Laser cut and engrave,Pen drawing
Laser cut and engrave,Pen drawing

Christmas Candy Jar Shaker

Instruction
Candyjarshaker.xcs
Candyjarshaker
.xcs
Application scenario
Laser processing、Pen drawing (30min)
Machine & module
xTool P2
55W
xTool S1
20W
Material used
300*300mm basswood board
546
7442
Information
      Christmas is here！Come and join us on the journey of hands-on creation，follow our step-by-step guide and have a go at creating your very own shaker charm！
Instruction
1
Step1: Import the XCS file
Preview
Preview
Preview
Preview
Start the machine, open the xTool Creative Space on the computer, select the style you want to make, drag in the required XCS file, adjust the parameters.
Ps:
  1. Different color layers represent different processing methods. Be sure to confirm the correct processing method. 
  2. Other patterns are prepared for you in Canvas 2 for you to choose from
 
2
Step2: Process
Preview
Preview
Preview
First, stick decorative paper on the oak board, then place the oak board in the machine working area for laser engraving and cutting, and then replace it with PVC sheet for laser cutting.
Warning:PVC laser cutting is toxic!!!
Other similar transparent materials like transparent acrylic can be used as substitutes.
For M1 Ultra, use the knife cutting mode to cut PVC sheets. If it's other models, it's best to use scissors for cutting.
Ps:
Applying a layer of masking paper on the surface of the wooden board can effectively relieve the yellowish-brown staining of the wooden board during the processing. But it doesn't matter if there is staining.Most of the staining can be wiped off with alcohol.
 
3
Step3: Assemble
Preview
Preview
Preview
4 More images

Prepare the tools, first remove the decorative paper on the accessory, stick the PVC sheet with the complete outer frame, and then stick the PVC sheet inward on both sides of the wooden frame with a short opening at the top. Then paint the small accessory with your favorite color, put it in through the opening at the top, and finally tie the silk belt. 
 
 
4
Step4: Complete
Preview
In this way, the candy jar shaker has been completed. Now you can shake this fun and lively Christmas ornament.
 
5
Step5: Remix and win rewards
Finished your DIY version? Submit it to enter the contest for a chance to win a $100 gift card or 5,000 credits.
 
Comments
Remixes
xTool Supplies Used in This Template
xTool P2
xTool P2
xTool S1
xTool S1

License

CC BY-NC-SA