HomeTemplatesDecorHome DecorWall Art
Drew's Den
Report
Laser cut and engrave Santa Claus wall decoration with red hat
Project made with xTool S1 machine for Christmas.
Project made with xTool S1 machine for Christmas.
Laser cut and engrave Santa Claus wall decoration with red hat
Laser cut and engrave Santa Claus wall decoration with red hat
Laser cut and engrave Santa Claus wall decoration with red hat
Laser cut and engrave Santa Claus wall decoration with red hat

Vintage Santa Wall Art

Instruction
santa.xcs
santa
.xcs
Application scenario
Laser processing (40min)
Machine & module
xTool S1
40W
Compatibles · 10
Material used
3mm Basswood Plywood
28
279
Information
      This is a custom laser-cut Vintage Santa design. To create it, you'll need two sheets of wood and some paint for finishing. The outline was initially generated using AI tools like Aimake, and I made manual adjustments using a vector editing tool to perfect the design.
Instruction
1
Step1: Laser Time
Preview

There are two basswood sheets to work with. One will serve as the backplate, while the other will be the piece you paint. Make sure to wear laser safety glasses during the cutting process. 

2
Step2: Paint
Preview

It's time to paint the Santa! You can use any colors you prefer, but the example above shows the colors I chose for my Santa design. Feel free to get creative

3
Step3: Glue

Now, it's time to glue your Santa. This step should only take a moment. I highly recommend starting with the outer layer, then carefully fitting and securing the rest of the pieces in place.

4
Step4: Your done
Preview

Good news, you're done!

Comments
Remixes
xTool Supplies Used in This Template
xTool S1
xTool S1
3mm Basswood Plywood
3mm Basswood Plywood

License

CC BY-NC-SA
This work contains AI-generated content.