HomeTemplatesToolJig
gooptroop.ian
Report
[Laser cut and engrave] Slide Extension Bottle Opener Jig
Project made with xTool F1 machine for Laser cut and engrave.
Project made with xTool F1 machine for Laser cut and engrave.
[Laser cut and engrave] Slide Extension Bottle Opener Jig
Project made with xTool F1 machine for Laser cut and engrave.
[Laser cut and engrave] Slide Extension Bottle Opener Jig
Project made with xTool F1 machine for Laser cut and engrave.
[Laser cut and engrave] Slide Extension Bottle Opener Jig
Project made with xTool F1 machine for Laser cut and engrave.
[Laser cut and engrave] Slide Extension Bottle Opener Jig
Project made with xTool F1 machine for Laser cut and engrave.
[Laser cut and engrave] Slide Extension Bottle Opener Jig
Project made with xTool F1 machine for Laser cut and engrave.
[Laser cut and engrave] Slide Extension Bottle Opener Jig
[Laser cut and engrave] Slide Extension Bottle Opener Jig
[Laser cut and engrave] Slide Extension Bottle Opener Jig
[Laser cut and engrave] Slide Extension Bottle Opener Jig
[Laser cut and engrave] Slide Extension Bottle Opener Jig
[Laser cut and engrave] Slide Extension Bottle Opener Jig
[Laser cut and engrave] Slide Extension Bottle Opener Jig
[Laser cut and engrave] Slide Extension Bottle Opener Jig
[Laser cut and engrave] Slide Extension Bottle Opener Jig

Slide Extension Bottle Opener Jig

SlideBottleOpener.xcs
SlideBottleOpener
.xcs
Application scenario
Laser (30min)
Machine & module
xTool F1
10W
Compatibles · 11
Material used
1/8"(3mm) Basswood Plywood
3mm Basswood Plywood
297
2922

Information

      This Jig will take 20 bottle openers. You will need the Slide Extension
1. Start with two 3mm plywood boards 400x115mm. 
2. Note the position of the 2 blocks on the slide extension. Do your normal side extension setup.
3. Run the files I did the score for the engrave alignment first. Then I ran the cut job.
4. Glue the two boards
Comments

Remixes

xTool Supplies Used in This Template

xTool F1
xTool F1
1/8"(3mm) Basswood Plywood
1/8"(3mm) Basswood Plywood
3mm Basswood Plywood
3mm Basswood Plywood