HomeTemplatesTools & Special MaterialsJigs
gooptroop.ian
Report
[Laser cut and engrave] Bottle Opener Jig
Project made with xTool F1 machine for Laser cut and engrave.
Project made with xTool F1 machine for Laser cut and engrave.
[Laser cut and engrave] Bottle Opener Jig
Project made with xTool F1 machine for Laser cut and engrave.
[Laser cut and engrave] Bottle Opener Jig
Project made with xTool F1 machine for Laser cut and engrave.
[Laser cut and engrave] Bottle Opener Jig
Project made with xTool F1 machine for Laser cut and engrave.
[Laser cut and engrave] Bottle Opener Jig
Project made with xTool F1 machine for Laser cut and engrave.
[Laser cut and engrave] Bottle Opener Jig
[Laser cut and engrave] Bottle Opener Jig
[Laser cut and engrave] Bottle Opener Jig
[Laser cut and engrave] Bottle Opener Jig
[Laser cut and engrave] Bottle Opener Jig
[Laser cut and engrave] Bottle Opener Jig
[Laser cut and engrave] Bottle Opener Jig
[Laser cut and engrave] Bottle Opener Jig

Bottle Opener Jig

BottleOpner.xcs
BottleOpner
.xcs
Application scenario
Laser (15min)
Machine & module
xTool F1
Compatibles · 9
Material used
3mm Basswood Plywood
1079
7089

Information

      This project is for the F1. 
The cut and engrave settings are in the project for making the template. 
Cut the Base Plate and the Jig and glue them together. You will need to sand the edges for a good fit in the F1. The third tab is for engraving the bottle openers. You will need to set your engrave settings. I have done this in XCS as not everyone will have lightburn or experience with it.

Edit 
Updated XCS file for tab 3 added example text. 
Tested Framing all good   
Remove the Standard Base Plate and fit the jig.
Comments

Remixes

xTool Supplies Used in This Template

xTool F1
xTool F1
3mm Basswood Plywood
3mm Basswood Plywood