HomeTemplatesDecorHome DecorWall Art
comp56
Report
Laser cut and engrave Smiling reindeer illustration on a rectangular card
Project made with xTool M1 Ultra machine for Christmas.
Project made with xTool M1 Ultra machine for Christmas.
Laser cut and engrave Smiling reindeer illustration on a rectangular card
Project made with xTool M1 Ultra machine for Christmas.
Laser cut and engrave Smiling reindeer illustration on a rectangular card
Laser cut and engrave Smiling reindeer illustration on a rectangular card
Laser cut and engrave Smiling reindeer illustration on a rectangular card
Laser cut and engrave Smiling reindeer illustration on a rectangular card
Laser cut and engrave Smiling reindeer illustration on a rectangular card

Rudolph Mirror

Instruction
rudolphmirror.xcs
rudolphmirror
.xcs
Application scenario
Laser processing (300min)
Machine & module
xTool M1 Ultra
20W
Material used
Acrylic mirror
Piant
47
529
Information
      [Style] Line art
[Prompt] funny reindeer smiling
AImake Info
atomm-ai-image
Style: Line art
[Prompt] funny reindeer smiling
Instruction
1
Step1: Image Prep From AImake
Preview
Preview
  1. With the Aimake program a cute rudolph is asked for
  2. This image is then brought into xcs software and is adjusted to size and edited
  3. This project is engraving on acrylic mirror so it is no different than regular mirror that it gets engraved on the back side in reverse
  4. This image didn't need reversing but if lettering or words are added then they will need reversing.
  5. Once the image is ready to be engraved it is sent to machine to be processed.
2
Step2: Painting the image
Preview
Preview
Preview
  1. When the image is engraved on the back side of the mirror it is clear
  2. The area's that need red paint  (the nose) gets red paint first, then once that paint is dry the second color is added.
  3. Repeat these steps based on the amount of different colors that are needed. Remember to only expose the area you want that color to be.
  4. Another tip is to not engrave mirror directly on the honeycomb, place a piece of wood between it and the mirror to engrave.
Comments
Remixes
xTool Supplies Used in This Template
xTool M1 Ultra
xTool M1 Ultra

License

CC0
This work contains AI-generated content.