Report
![[Laser cut and engrave] QuiltStar](https://image-res.xtool.com/resource/xtool/community/attachment/xtool-community/e2a966c6-e932-4fb1-8e37-ad88fe70bbdd?x-oss-process=image/resize,w_1200,h_900,limit_0/interlace,1/format,webp/auto-orient,1)
QuiltStar
Instructionquiltstar
.xcs
Application scenario
Laser processing (9min)
Machine & module
xTool S1
20WCompatibles · 11
Accessories
xTool S1 Honeycomb Panel
Material used
1/8"(3mm) Basswood Plywood
65
520
Information
Quilt Star Christmas Ornament
Instruction
1
Step1
Insert material onto honeycomb Panel. This design can produce 2 items on a 12x12 sheet.
2
Step2
Mark your working area with the rectangle option, to add some contrast to this one I cut 4 of the shapes from basswood and 4 from walnut.
3
Step3
Verify the correct settings for your machine. I ran this project on the S1-20W. Feel free to adjust the power and speeds to your liking.
4
Step4
Run the project, 9 minutes of runtime. A little more if you are utilizing 2 different wood types.
5
Step5
Remove the project pieces and lay out the smaller shapes onto the base as desired. I alternated basswood/walnut
6
Step6
Assemble the pieces together and glue up.
7
Step7
Finish with a thin layer of clearcoat.
8
Step8
Add a string to the hole cut and hang on your tree.
Comments
