You want to make your own design? You can either design the box from scratch like me or just change top, bottom and the sides of the box in XTool Creative space!
 

Use one of the two XCS-files and adjust it as you like. The custom one has no engraving or cutout so that you can edit the sides and the top.
I added some text at the bottom of the box. Feel free to make your own adjustments!

Cutting is pretty straight forward! Cut the files with the settings above. Or just open the XCS-file in XTool Creative Space, add a 3mm wood to your working area and measure the height. You are ready to cut the wood!

Assembly is pretty easy: 

1. wrap the long side part half way around the bottom part (the one with the text)

2. Add the top part (not the lid but the one with the big cutout) and insert it in the top holes of the side part.

3. Finish wrapping the side part around and connect the two ends

4. Put the lid on top and you are ready to use your custom gift box!

Have fun with the build!

Be creative when it comes to the use of this box!
Here are a few examples:
 

1. Use the box for tissues or pocket handkerchiefs
2. Use the box for pencils
3. Use the box for a candle (looks pretty nice at night!)
4. Use the box for presents
    

Have fun!