![[Laser cut and engrave] ChristmasBox](https://image-res.xtool.com/resource/xtool/community/attachment/xtool-community/9658ce34-c557-4dae-a36d-a0eb2012ee54?x-oss-process=image/resize,w_1200,h_900,limit_0/interlace,1/format,webp/auto-orient,1)
ChristmasBox
Instruction
Information
Small hexagon Christmas Box - 3mm
Instruction
Step1
Insert material onto honeycomb Panel. This design is utilized to use only 1 piece of 12x12- 3mm Basswood
Step2
Mark your working area with the rectangle option, this project takes up the full 12x12 sheet, make sure to mark on the edges to fit this one on a single sheet.
Step3
Verify the correct settings for your machine. I ran this project on the S1-20W. Feel free to adjust the power and speeds to your liking.
Step4
Run the project, approx 25 minutes
Step5
Remove the inner hexagon for painting. I added a single coat of bright red.
Step6
Assemble the pieces together and glue up.
I assemble the bottom and sides first
second I attach the top to the sides
finally I assemble the topper and center the accent color to topper to allow a snug fit to the base
See image for parts- feel free to message with questions
Step7
This can be used as a light box as well, you can omit the accent top and light with a led tealamp.
