Happy Holidays Coaster
Instruction
Serve your drinks with style this holiday season with this festive slate coaster.
Image created with AI Make using the following parameters:
[Style] Hologram
[Prompt] "Happy Holidays!" in cursive font and snowflakes
Place the rock coaster on your device's honeycomb plate or triangular prisms. Ensure that it is parallel to the laser's X-axis. Use “snapshot preview” to bring the coaster and background into XCS.
Find the center of the coaster with measuring tape, and mark the spot with a pencil.
Position the laser module so that the red cross is aligned on the center-point you marked in step 2.
Auto measure distance at this point.
In order for the image to engrave properly on the dark slate, you must invert it:
- Select the image on the canvas.
- Click “Adjust.”
- Check “Invert.”
While keeping the red cross over the center-point of the coaster's surface, align the image in XCS so that its center is at the red-cross.
Click “Framing” and follow the on-screen instructions to ensure the engraving area is correct.
Process and Engrave!
After engraving, clean the slate coaster gently with a soft cloth to remove any residue or dust from the engraving process.
The rock coaster can be used as is (first photo).
You can also apply a clear sealant for added protection. Use a gloss top coat for a shiny finish (last photo). Follow the manufacturer's instructions to apply the sealant.