HomeTemplatesFashion & WearablesAccessories
maureen.nemetski
Report
Laser cut and engrave
Project made with xTool M1 Ultra machine for Laser cut and engrave.
Project made with xTool M1 Ultra machine for Laser cut and engrave.
Laser cut and engrave
Project made with xTool M1 Ultra machine for Laser cut and engrave.
Laser cut and engrave
Project made with xTool M1 Ultra machine for Laser cut and engrave.
Laser cut and engrave
Project made with xTool M1 Ultra machine for Laser cut and engrave.
Laser cut and engrave
Laser cut and engrave
Laser cut and engrave
Laser cut and engrave
Laser cut and engrave
Laser cut and engrave
Laser cut and engrave

Funny Hip Flask for Parent of Teenagers - 'Don't Judge Me - I Have Teenagers

Instruction
DadofTeensHipFlask.xcs
DadofTeensHipFlask
.xcs
Application scenario
Laser processing (10min)
Machine & module
xTool M1 Ultra
20W
Material used
Stainless Steel Hip Flask
175
989
Information
      The perfect gift for the harried parent of teenagers who has had a rough day.  The XCS file is setup to laser engrave on an 8oz stainless steel hip flask, but feel free to use the image file to create wine glasses, tumblers, gift bags, cards, or anything else your imagine can come up with.  
Image created using AI Make with the following parameters:

[Style] Handmade poster
[Prompt] Don't judge me - I have teenagers.
AImake Info
atomm-ai-image
Style: Handmade poster
[Prompt] Don't judge me - I have teenagers.
Instruction
1
Step1: Position the hip flask
Preview

Place the Hip Flask on your device's honeycomb plate or triangular prisms. Ensure that it is parallel to the laser's X-axis. Use “snapshot preview” to bring the flask and plate into XCS.

2
Step2: Mark the mid-point on the flask's surface.
Preview
Preview

Find the mid-point of the hip flask with measuring tape, and mark the spot with a pencil.

3
Step3: Align the laser's red cross with the mid-point of the flask.
Preview

Position the laser module so that the red cross is aligned on the mid-point you marked in step 2. 

Auto measure distance at this point.

4
Step4: Center the image on the flask
Preview

While keeping the red cross over the mid-point of the flask surface, align the image in XCS so that its center is at the red-cross.

5
Step5: Check Framing

Click “Framing” and follow the on-screen instructions to ensure the engraving area is correct.

6
Step6: Process and Engrave
Preview

Process and Engrave!

Comments
Remixes
xTool Supplies Used in This Template
xTool M1 Ultra
xTool M1 Ultra

License

CC BY-NC-SA
This work contains AI-generated content.