HomeTemplatesDecorHome DecorWall Art
CarvingCreatives IG
Report
[Laser cut and engrave] Canvas print with deer and forest scene
Project made with xTool S1 machine for Laser cut and engrave.
[Laser cut and engrave] Canvas print with deer and forest scene
[Laser cut and engrave] Canvas print with deer and forest scene

Canvas print with deer and forest scene

Instruction
3deercanvas.xcs
3deercanvas
.xcs
Application scenario
Laser processing (18min)
Machine & module
xTool S1
20W
Compatibles · 8
Accessories
xTool S1 Honeycomb Panel
Material used
Coated Canvas (White+Black)
120
773

Instruction

1

Step1

Canvas print with deer and forest scene instruction: step 1 -
Preview

Place the canvas material onto the honeycomb base

2

Step2

Auto measure the distance for you material

3

Step3

Mark your working area with the rectangle option, I marked area just outside the working area to make sure it was filled to the edge

 

4

Step4

Verify the correct settings for your machine. I used a 20W set at 60% and 220 speed.

5

Step5

Run the project; depending on size, time will vary. This was a 4x4 canvas and it took around 18 minutes

6

Step6

Remove the finished project from the machine, blast it with compressed air to remove the residue, wipe it with a damp cloth, and finally finish it off with a couple of light coats of clear poly. 

Comments

Remixes

xTool Supplies Used in This Template

xTool S1 Honeycomb Panel
xTool S1 Honeycomb Panel
xTool S1
xTool S1
Coated Canvas (White+Black)
Coated Canvas (White+Black)

License

CC BY