Report
![[Laser cut and engrave] Wooden Christmas lanterns with intricate cut-out designs](https://image-res.xtool.com/resource/xtool/community/attachment/xtool-community/3c82a737-b3fd-4bef-8968-2156251053f6?x-oss-process=image/resize,w_1200,h_900,limit_0/interlace,1/format,webp/auto-orient,1)
Wooden Christmas lanterns with intricate cut-out designs
Instruction
LampickachristmasV0.1
.xcs
Application scenario
Laser processing (38min)
Machine & module
xTool S1
10W
xTool M1 Ultra
10WMaterial used
3mm plywood
Birch plywood 3 mm
1012
4075
Information
It is a wooden lantern made of 3mm plywood. I use birch but it's up to everyone. The lantern has a Christmas motif and the idea is to put a battery operated tea light in it. I wouldn't risk the original tea light candle. Plywood is not always exactly 3mm and so you may need to put glue in the locks. Have a nice and peaceful Christmas :)
Instruction
1
Step1: Cut
Preview
birch plywood 3mmYou need to use your own settings for cutting as each plywood behaves differently ! Therefore I recommend to use your own settings that work for you !
2
Step2: Build
Here we get into the folding. If you have already cleaned each part, take the glue. I use wood glue but you could probably use a second glue :)
Start building the side pieces on the bottom figure. ATTENTION if the locks are loose you need to use glue
then attach the top piece and start building the last chapel.
Insert the bracket into the lamp and secure with a pin which we do not glue!
Done! :) Use a battery operated tea light in the lamp !!!!!!
Comments
