Report
![[Laser cut and engrave] Personalized dog-themed Christmas ornaments on tree](https://image-res.xtool.com/resource/xtool/community/attachment/xtool-community/d0770617-2cfc-40a3-b605-a49fe732fd75?x-oss-process=image/resize,w_1200,h_900,limit_0/interlace,1/format,webp/auto-orient,1)
Acrylic Christmas Ball
InstructionChristmas-tree-decoration
.xcs
Application scenario
Laser processing (60min)
Machine & module
xTool P2
55WMaterial used
3mm transparent glittery silver acrylic board
1/8"(3mm) Basswood Plywood
571
4306
Information
Christmas is coming soon. I made a wooden decoration to hang on the Christmas tree. Come and decorate your Christmas tree.
Instruction
1
Step1: Import the XCS file
Preview
Preview
Preview
Preview
Start the machine, open the xTool Creative Space on the computer, drag in the required XCS file, adjust the parameters.
2
Step2: Apply the masking tape
Preview
Before starting to cut the wooden board, we can stick a layer of decorative paper on the surface of the board to prevent carbonized dust from adhering to the surface of the board.
3
Step3: Laser cutting
Preview
Preview
Cut the acrylic sheet and the wooden board in turn. Refresh and take photos before each cutting, and adjust the image position after distance measurement.Clean the masking tape after cutting.
Tear off the film before cutting the acrylic sheet, otherwise it will affect the engraving effect.
4
Step4: Paste and decorate
Preview
Paste the corresponding acrylic sheets and wooden boards. Finally, tie your favorite ribbons and strings.
Comments
