HomeTemplatesFashion & WearablesJewelry
harmonyschell
Report
Laser cut and engrave
Project made with xTool P2 machine for Laser cut and engrave.
Project made with xTool P2 machine for Laser cut and engrave.
Laser cut and engrave
Project made with xTool P2 machine for Laser cut and engrave.
Laser cut and engrave
Project made with xTool P2 machine for Laser cut and engrave.
Laser cut and engrave
Project made with xTool P2 machine for Laser cut and engrave.
Laser cut and engrave
Project made with xTool P2 machine for Laser cut and engrave.
Laser cut and engrave
Project made with xTool P2 machine for Laser cut and engrave.
Laser cut and engrave
Project made with xTool P2 machine for Laser cut and engrave.
Laser cut and engrave
Project made with xTool P2 machine for Laser cut and engrave.
Laser cut and engrave
Project made with xTool P2 machine for Laser cut and engrave.
Laser cut and engrave
Laser cut and engrave
Laser cut and engrave
Laser cut and engrave
Laser cut and engrave
Laser cut and engrave
Laser cut and engrave
Laser cut and engrave
Laser cut and engrave
Laser cut and engrave
Laser cut and engrave
Laser cut and engrave

Butterfly Earrings

Butterfly earrings.xcs
Butterfly earrings
.xcs
Application scenario
Laser (2min)
Machine & module
xTool P2
55W
Compatibles · 9
Material used
3mm Basswood Plywood
125
1301
Information
      Make ready to wear earrings in 20 minutes or less from start to finish using acrylic paint pens, UV resin, earring posts and of course the butterfly design.

Pick your design from XCS- I choose a butterfly.  Outline the design- I used .02 as my setting.  Engrave the original design and cut  the outline. Paint with as much or as little detail as you would like. Apply UV resin to front of butterfly and cure.  Flip over and put a dot of resin on the back and place earring post on dot.  Cure. Now wear or gift.
Comments
Remixes
xTool Supplies Used in This Template
xTool P2
xTool P2
3mm Basswood Plywood
3mm Basswood Plywood