Report
![[Laser cut and engrave] Wooden Notebook Cover](https://image-res.xtool.com/ali-res/community/making/597f993b-0545-4d73-866f-269ab8f6b039/IMG_7869.PNG?x-oss-process=image/resize,w_1200,h_900,limit_0/interlace,1/format,webp/auto-orient,1)
Wooden Notebook Cover
Instruction3d blok notebook cover
.xcs
Application scenario
Laser (5min)
Machine & module
xTool P2
55WCompatibles · 11
Material used
1/8"(3mm) Basswood Plywood
150
1413
Information
Make your own notebook and you'll never need to buy one again. Most of time, people want to gift the custom book especially for lovely friends.
Instruction
1
Step1: Material Placement
Preview
Make sure that material is stable for cutting. Place the basswood correctly, adjust the settings as needed. Once finished, proceed to the cutting process. In this process, 12x12 inc 3mm basswood material was used. You can place the project according to close capture view camera option. And click process to frame the cutting range.
2
Step2: Sanding
Preview
Don't forget to sand the basswood before gluing the two covers. You can eliminate the bad appearance and burning parts on the cover by sanding it. After sanding, you can glue the two covers.
3
Step3: Final
Preview
After sanding and gluing the covers, you can assemble the two cover's holes by using the rope/fabric. After that you can use as a notebook by putting paper in it. Or you can use as a folder. You can use it for many purposes
Comments