Report
![[Laser cut and engrave] Acrylic Sunflower](https://image-res.xtool.com/ali-res/community/making/3ac75ee5-6754-4779-b128-35deafb53290/PXL_20230920_173349856.jpg?x-oss-process=image/resize,w_1200,h_900,limit_0/interlace,1/format,webp/auto-orient,1)
Acrylic Sunflower
Remix
Instructionoriginalxtoolfile
.xcs
Show 1 more
Application scenario
Laser (20min)
Machine & module
xTool D1 Pro
20WMaterial used
Paint,
Transparent Acrylic
15
780
Information
it has been known the sunflower follows the sun, it has the ability to talk to you if you listen close enough as well. Here is a deviation of an Xtool sunflower, I will include the original xtool file along with my changes.
This remix is based on
The original work has been deleted or is no longer accessible.
Instruction
1
Step1: Design Changes
Preview
Preview
I took this original file from xtool and resized it larger, I also made the entire sunflower from different color acrylic sheets, orange, yellow, brown and green. i used to same pattern from the original design but scored the center of the flower instead of engraving.
2
Step2: Settings and Assembly
Preview
Preview
Preview
Preview
once each color was cut with the D1 20w pro the layers were bonded together with spray adhesive, now some say spray adhesive is not a good glue to use but I found with a coat on each piece and waiting the proper time to bond them together it sticks very well. If you do it to fast it is a poor result.
Comments