HomeTemplatesDecorHome DecorShelves & Holders
kdward30
Report
[Laser cut and engrave] Jewelry Stand
Project made with xTool P2 machine for Laser cut and engrave.
Project made with xTool P2 machine for Laser cut and engrave.
[Laser cut and engrave] Jewelry Stand
Project made with xTool P2 machine for Laser cut and engrave.
[Laser cut and engrave] Jewelry Stand
Project made with xTool P2 machine for Laser cut and engrave.
[Laser cut and engrave] Jewelry Stand
Project made with xTool P2 machine for Laser cut and engrave.
[Laser cut and engrave] Jewelry Stand
Project made with xTool P2 machine for Laser cut and engrave.
[Laser cut and engrave] Jewelry Stand
Project made with xTool P2 machine for Laser cut and engrave.
[Laser cut and engrave] Jewelry Stand
Project made with xTool P2 machine for Laser cut and engrave.
[Laser cut and engrave] Jewelry Stand
Project made with xTool P2 machine for Laser cut and engrave.
[Laser cut and engrave] Jewelry Stand
Project made with xTool P2 machine for Laser cut and engrave.
[Laser cut and engrave] Jewelry Stand
Project made with xTool P2 machine for Laser cut and engrave.
[Laser cut and engrave] Jewelry Stand
Project made with xTool P2 machine for Laser cut and engrave.
[Laser cut and engrave] Jewelry Stand
Project made with xTool P2 machine for Laser cut and engrave.
[Laser cut and engrave] Jewelry Stand
Project made with xTool P2 machine for Laser cut and engrave.
[Laser cut and engrave] Jewelry Stand
Project made with xTool P2 machine for Laser cut and engrave.
[Laser cut and engrave] Jewelry Stand
Project made with xTool P2 machine for Laser cut and engrave.
[Laser cut and engrave] Jewelry Stand
Project made with xTool P2 machine for Laser cut and engrave.
[Laser cut and engrave] Jewelry Stand
Project made with xTool P2 machine for Laser cut and engrave.
[Laser cut and engrave] Jewelry Stand
Project made with xTool P2 machine for Laser cut and engrave.
[Laser cut and engrave] Jewelry Stand
Project made with xTool P2 machine for Laser cut and engrave.
[Laser cut and engrave] Jewelry Stand
Project made with xTool P2 machine for Laser cut and engrave.
[Laser cut and engrave] Jewelry Stand
[Laser cut and engrave] Jewelry Stand
[Laser cut and engrave] Jewelry Stand
[Laser cut and engrave] Jewelry Stand
[Laser cut and engrave] Jewelry Stand
[Laser cut and engrave] Jewelry Stand
[Laser cut and engrave] Jewelry Stand
[Laser cut and engrave] Jewelry Stand
[Laser cut and engrave] Jewelry Stand
[Laser cut and engrave] Jewelry Stand
[Laser cut and engrave] Jewelry Stand
[Laser cut and engrave] Jewelry Stand
[Laser cut and engrave] Jewelry Stand
[Laser cut and engrave] Jewelry Stand
[Laser cut and engrave] Jewelry Stand
[Laser cut and engrave] Jewelry Stand
[Laser cut and engrave] Jewelry Stand
[Laser cut and engrave] Jewelry Stand
[Laser cut and engrave] Jewelry Stand
[Laser cut and engrave] Jewelry Stand
[Laser cut and engrave] Jewelry Stand
[Laser cut and engrave] Jewelry Stand
[Laser cut and engrave] Jewelry Stand

Jewelry Stand

JewelryBatSatan (2).xcs
JewelryBatSatan (2)
.xcs
Application scenario
Laser (20min)
Machine & module
xTool P2
55W
Compatibles · 11
Material used
1/8"(3mm) Basswood Plywood
3mm Basswood Plywood
418
4525

Information

      A jewelry stand in the cute design of a bat.  It can hold earrings, necklaces, bracelets and even rings
Comments

Remixes

xTool Supplies Used in This Template

xTool P2
xTool P2
1/8"(3mm) Basswood Plywood
1/8"(3mm) Basswood Plywood
3mm Basswood Plywood
3mm Basswood Plywood