Report
![[Laser cut and engrave] Forest Space Layered Carving](https://image-res.xtool.com/resource/xtool/community/attachment/xtool-community/0662be6f-c30f-4d4b-b88c-23e1a8599ddd?x-oss-process=image/resize,w_1200,h_900,limit_0/interlace,1/format,webp/auto-orient,1)
Forest Space Layered Carving
Instructionforestspace
.xcs
Application scenario
Laser processing (30min)
Machine & module
xTool P2
55WCompatibles · 10
Material used
1/8"(3mm) Basswood Plywood
82
757
Instruction
1
Step1: Import the XCS file
Preview
Turn on the machine, open xTool Creative Space on the computer, drag in the required xcs file, and adjust the parameters
2
Step2: Process
Put the basswood plywood into the processing area and make sure the material is flat. Then use a laser to cut the plywood. Note: The laser parameters marked here are the officially recommended parameters for 3mm basswood boards. If you prefer different effects, please adjust them manually.
3
Step3: Assemble
Preview
First, assemble the outer frame but don't attach the back cover. Then, assemble the parts in sequence according to the markings from 1 to 9 on the drawing.
Comments
