Report
![[Laser cut and engrave] Wooden Phonograph](https://image-res.xtool.com/resource/xtool/community/attachment/xtool-community/80af587c-60b0-4638-8ed5-cdd597f69acd?x-oss-process=image/resize,w_1200,h_900,limit_0/interlace,1/format,webp/auto-orient,1)
Wooden Phonograph
Instructionphonograph
.xcs
Application scenario
Laser processing (30min)
Machine & module
xTool P2S
55WMaterial used
1/8"(3mm) Basswood Plywood
3mm Black Acrylic (for Slide Extension)
81
686
Instruction
1
Step1: Import the XCS file
Preview
Start the machine, open the xTool Creative Space on the computer, drag in the required XCS file, adjust the parameters.
2
Step2: Cut
Put the basswood plywood or acrylic into the processing area and make sure the materials are flat. Then use laser cutting. Note: The laser parameters marked here are the officially recommended parameters for 3mm basswood boards and black acrylic. If you prefer different effects, please adjust them manually.
3
Step3: Color
Color the cut bottom building block graphic pieces and then take them off and set them aside by classification.
4
Step4: Assemble
Preview
Assemble it according to the example diagram. The horn part needs to be fixed with glue. After the glue has dried and solidified, you will get a nice-looking phonograph.
Comments
