Report
![[Blade cut,Inkjet printing] Merry Christmas cards with red Christmas tree design](https://image-res.xtool.com/resource/xtool/community/attachment/xtool-community/708f9473-5c36-4081-a85a-f09b9aa9ecf9?x-oss-process=image/resize,w_1200,h_900,limit_0/interlace,1/format,webp/auto-orient,1)
Christmas hollow out greeting card
InstructionHollowoutgreetingcard
.xcs
Application scenario
Blade cut、Inkjet printing (30min)
Machine & module
xTool M1 Ultra
20WMaterial used
300*400mm White cardboard
300*400mm Pearl paper
116
1271
Information
Let's make Christmas hollow out greeting cards together!
Instruction
1
Step1: Import the XCS file
Start the machine, open the xTool Creative Space on the computer, drag in the required XCS file, adjust the parameters.
2
Step2: Knife Cutting
Preview
According to the interface prompt, install a fine cutting knife and apply pearl paper to cut the pattern outline of the hollow part.
1. Because the auxiliary folding line does not need to be cut through, it will prompt for smaller parameters, which can be ignored.
2. The fine cutting blade has a sharp tip, so be careful of cutting during installation and disassembly.
3
Step3: Inkjet and knife cutting
Preview
According to the interface prompt, install the inkjet head, replace it with white cardboard for pattern inkjet and cut it off.
4
Step4: Paste
Preview
Paste the pattern and hollow part together.
5
Step5: Complete
Preview
Finished product display.
Comments
