Report
![[Laser cut and engrave] Autumn Picnic - Dahlia Wine Tray](https://image-res.xtool.com/ali-res/community/making/493aa033-8782-4d13-86be-e26780abb297/IMG_6583.jpeg?x-oss-process=image/resize,w_1200,h_900,limit_0/interlace,1/format,webp/auto-orient,1)
Autumn Picnic - Dahlia Wine Tray
Instruction
Fall Picnic - Wine Tray - Dahlia
.xcs
Application scenario
Laser (28min)
Machine & module
xTool P2
55WCompatibles · 12
Material used
1/8"(3mm) Basswood Plywood
3mm Basswood Plywood
361
4269
Instruction
1
Step1: Import project file
Preview
Import the project file.
2
Step2: Add material to machine
Preview
Place material on machine and secure.
3
Step3: Check settings and run project
Preview
Check your settings and run the project.
4
Step4: Remove from machine
Preview
Preview
Remove the cut project from the machine and pop out any extra pieces.
5
Step5: Clean and clear coat
Preview
Preview
Clean any soot off with a baby wipe. Spray with clear coat if you choose.
6
Step6: Finish and enjoy
Preview
Preview
Add your wine and glasses.
Comments
