I chose a circle, but you can do any shape.

I used “Kindness Coin” and the points.

Place your words into your coin. I chose to use the curve text option to make mine look nicer.

Group your words and place them on their own layer.  Then assign them to engrave and set your power and speed.

Then make your coin outline a cut and set your power and speed.

I copy and pasted a single column, then I grouped that column and copy pasted it to make more.

I also chose to add the teacher's name to the other side of the coin.

Place your material on your machine and secure.

Align your project to your material.  Then process first side.  I chose the teacher's name side first so that the cut would be last and on the other side.

I used a compressor to blow off the soot.

Place material back on machine with clean side up.  Realign your material.  I use small cutout holes for my alignment.

Remove the final product from the machine and clean any soot.

As you can see, the teacher I made these for wanted different coin denominations.