HomeTemplatesDecorHome DecorWall Art
scrapbookmemories
Report
Laser cut and engrave Wooden Jesus cross wall art decoration with crown of thorns
Project made with xTool F1,xTool F1 Ultra machine for Laser cut and engrave.
Project made with xTool F1,xTool F1 Ultra machine for Laser cut and engrave.
Laser cut and engrave Wooden Jesus cross wall art decoration with crown of thorns
Laser cut and engrave Wooden Jesus cross wall art decoration with crown of thorns
Laser cut and engrave Wooden Jesus cross wall art decoration with crown of thorns
Laser cut and engrave Wooden Jesus cross wall art decoration with crown of thorns

Engrave Wooden Jesus cross wall art decoration with crown of thorns with F1 Ultra

Instruction
F1UJesusChristcurve.xcs
F1UJesusChristcurve
.xcs
Application scenario
Laser processing (30min)
Machine & module
xTool F1
2W, 10W
xTool F1 Ultra
20W
Compatibles · 6
Material used
3mm Pine Plywood
167
622
Information
      Trying out the curve engraving on home decor memory plate by Walnut Hollow by using the F1 Ultra.
Instruction
1
Step1: Select on the processing mode.
Preview
Preview

Select curve material then click on the curve measure to activate the process.

2
Step2: Measure curve & 3D model

By setting horizontal and vertical points for the depth measuring of the memory plate. Depending on the size of the curvature the more points you select the more details on its mapping.

 

3
Step3: Preview before process

After all the curve measure you may preview before hitting the process

4
Step4

Hitting process and let it run. For the size of 121x146mm it took about 25min to complete.

5
Step5: Ready to be hung.

You may sand the edges if there are gunk on the edges.

Comments
Remixes
xTool Supplies Used in This Template
xTool F1
xTool F1
xTool F1 Ultra
xTool F1 Ultra
3mm Pine Plywood
3mm Pine Plywood

License

Standard License