HomeTemplatesDecorKitchen Decor
comp56
Report
[Laser cut and engrave] Wooden Spoon
Project made with xTool D1 Pro machine for Laser cut and engrave.
Project made with xTool D1 Pro machine for Laser cut and engrave.
[Laser cut and engrave] Wooden Spoon
Project made with xTool D1 Pro machine for Laser cut and engrave.
[Laser cut and engrave] Wooden Spoon
Project made with xTool D1 Pro machine for Laser cut and engrave.
[Laser cut and engrave] Wooden Spoon
[Laser cut and engrave] Wooden Spoon
[Laser cut and engrave] Wooden Spoon
[Laser cut and engrave] Wooden Spoon
[Laser cut and engrave] Wooden Spoon
[Laser cut and engrave] Wooden Spoon
[Laser cut and engrave] Wooden Spoon

Wooden Spoon

Instruction
spoon.xcs
spoon
.xcs
Application scenario
Laser (15min)
Machine & module
xTool D1 Pro
20W
Compatibles · 11
Material used
1/8"(3mm) Basswood Plywood
3mm Basswood Plywood
18
883

Information

      Love how we can engrave on almost anything here is a wood spoon with a great band name that fits the bill...

Instruction

1

Step1: Setting Up Text

Wooden Spoon instruction: step 1 - Setting Up Text
Preview

Step 1) With the size of the spoon known, I set up the wording I wanted and made it fit the spoon, I also chose a font to be bold from the options on the right hand side of the text features.

2

Step2: Finalizing Settings

Wooden Spoon instruction: step 2 - Finalizing Settings
Preview

Step 2) Adjusting the engrave settings, Along with this a set up on the machine was needed to secure the little spoon from moving, the air assist was not used in this engraving in fear it would move the subject.

Comments

Remixes

xTool Supplies Used in This Template

xTool D1 Pro
xTool D1 Pro
1/8"(3mm) Basswood Plywood
1/8"(3mm) Basswood Plywood
3mm Basswood Plywood
3mm Basswood Plywood