Report
Christmas Santa Gift Tag
Instruction67SantaGiftTag
.xcs
Application scenario
Laser processing、Inkjet printing (45min)
Machine & module
xTool M1 Ultra
10W, Ink moduleMaterial used
3mm Basswood Plywood
56
454
Information
The project is colored/printed using the inkjet module on the M1 Ultra. The text is engraved.
Bill of Materials
xTool parts
1/8" Basswood Plywood Sheets (6pcs)/44325
x1
* Currently only available in US store
Instruction
1
Step1: Print the Designs
Preview
Note: If you opened the XCS file that comes with this tutorial, all settings are already set-up for use with the M1 Ultra 10W.
- Open the file in xTool Creative Space.
- Load the inkjet module in your machine.
- Place the wood on top of the triangular prisms. Secure with tape or limit blocks, so that nothing moves.
- Change the Mode to Inkjet printing on the top bar in XCS.
- Print the file at 60% intensity.
2
Step2: Laser Cut
Preview
If your machine has been calibrated correctly, you should be able to laser cut the designs out without the need to manually frame.
- Switch the inkjet module to the laser module.
- Change the Mode to Lasering on flat surface on the top bar in XCS.
- Turn the output to the bitmap images/designs to OFF.
- Set the black cut lines to 100 Power and 4 Speed for Cut. I only need 1 Pass at this setting.
- Set the green engrave lines to 70 Power and 150 Speed, 1 Pass.
- Measure the distance. I got 14mm as my distance for 3mm plywood sheet on top of the triangular prisms.
- Click the green Process button on the top right of the screen.
- A preview will be shown. Click the green Start button (top right) to send it to the machine.
- Press the button on the M1 Ultra machine to start.
3
Step3: Assembly
Preview
- Glue the Santa head in the center of the gift tag.
- After it is dry, loop a ribbon in the hole.
Comments
Remixes
xTool Supplies Used in This Template