Report
![[Laser cut and engrave] Leather patch with Alberta text and bear design](https://image-res.xtool.com/resource/xtool/community/attachment/xtool-community/ca352e46-5a8e-40a7-b075-daf659aa4797?x-oss-process=image/resize,w_1200,h_900,limit_0/interlace,1/format,webp/auto-orient,1)
Leather Alberta patch
InstructionAlbertaPatch
.xcs
Application scenario
Laser processing (3min)
Machine & module
xTool F1
2W, 10WAccessories
Desktop Air Purifier for xTool F1
Material used
1/50"(0.5mm) Silver-black Leather (for Slide Extension)
90
481
Information
This is a custom patch design I made They are iron on patches with the adhesive backing already on the Faux leather that work best on hats and beanies but also work well on other clothing.
Instruction
1
Step1: Making Patch
Preview
Preview
- only screw in the L-Shaped bracket one thread so it is attached but very loose.
- use the gap between the bracket and the build plate to hold down your leather and tighten (tightening is optional so long as the leather wont move)
- hit start.
- the design is made so that the last “Purple” cut makes the cut off piece a perfect square so you can easily reset and make another patch.
- if scorching occurs adjust the cut speed and intensity to account for the different thickness of material.
2
Step2: Washing the Patch
- gently rub the patch with COLD!!! water as warm or hot water will activate the adhesive and cause it to stick to itself.
- you can use soap but I don't as flowing water is usually enough
- if scorching occurs a magic eraser and a bit of Vinegar is a great method to clean up the marks.
Comments
