HomeTemplatesDecorSeasonal & Themes DecorHolidays Decor
LaserCutano
Report
Laser cut and engrave
Project made with xTool S1 machine for Christmas.
Project made with xTool S1 machine for Christmas.
Laser cut and engrave
Project made with xTool S1 machine for Christmas.
Laser cut and engrave
Laser cut and engrave
Laser cut and engrave
Laser cut and engrave
Laser cut and engrave

Star with Christmas Scene

Instruction
ChristmasStar.xcs
ChristmasStar
.xcs
Application scenario
Laser processing (30min)
Machine & module
xTool S1
20W
Compatibles · 9
Material used
3mm Basswood Plywood
363
1406
Information
      Introducing our exquisite Layered Christmas Star laser cut template, a captivating layered wood product that adds a touch of natural beauty to your holiday festivities. Crafted with precision and love, this hand-assembled decoration brings the charm of the outdoors right into your living room.

ABOUT THE FINISHED PRODUCT:
CHRISTMAS STAR multilayer layout size (finished product): 9 x 9 inch.
You can easily change the size of the product.
Number of layers: 8.
Recommended material - Plywood, MDF, Acrylic, Plexiglas, Metal, Cardboard, Paper.
Recommended Material Thickness - 3 - 6 mm (1 / 12in - 1 / 4in).

For your convenience, the downloadable zip folder contains files of different formats such as: .AI, .SVG, .DXF, .DWG, .CDR, .EPS, .PDF and .XCS formats.
Instruction
1
Step1: Using xTool Creative Space
Preview

Switch on the machine, open xTool Creative Space on your computer, drag in the required XCS file, 300*600*3mm Plywood board into the machine, refresh the page, click on ranging, adjust the parameters, and get ready for cutting. When using the S1 machine, you need to turn on the air pump to prevent the board from yellowing and discoloring during laser cutting.

BLACK LAYER

  1. Make sure you opened "Layer and Object List” by clicking on the Icon on the bottom left of the screen.
  2. Select the black layer (this layer contains the path for cutting).
  3. Set the processing type of the black layer to Cut. 
  4. Click on “EasySet panel” to open the power and speed settings for the selected layer.
  5. Set the Power (S1-20w: 100) 
  6. Set Speed (S1-20w: 5) 
  7. Set Number of Passes (S1-20w: 1)
2
Step2: After cutting
Preview
Preview

After cutting you have 8 layers.

You should glue all the layers of this decorative together.

You can paint before gluing.

3
Step3: Done
Preview

Now you can decorate your home with this Christmas Star!

Comments
Remixes
xTool Supplies Used in This Template
xTool S1
xTool S1
3mm Basswood Plywood
3mm Basswood Plywood

License

CC BY-NC