HomeTemplatesDecorSeasonal & Themes DecorHolidays Decor
LaserCutano
Report
Laser cut and engrave
Project made with xTool S1 machine for Christmas.
Project made with xTool S1 machine for Christmas.
Laser cut and engrave
Laser cut and engrave
Laser cut and engrave
Laser cut and engrave

Christmas Ornament with Bunny

Instruction
ChristmasOrnamentwithBunny.xcs
ChristmasOrnamentwithBunny
.xcs
Application scenario
Laser processing (30min)
Machine & module
xTool S1
20W
Compatibles · 9
Material used
3mm Basswood Plywood
153
760
Information
      Add a touch of festive elegance to your holiday decorations with this beautifully Christmas ornament! This laser-cut file enables you to create a intricate wooden ornament, designed with classic Christmas motifs and patterns. Perfect for hanging on the tree, decorating around the home, or adding to holiday gifts, this ornament bring warmth and tradition to any setting. Easy to cut and assemble, this set is ideal for those looking to enhance their holiday decor with timeless charm and handcrafted detail.

ABOUT THE FINISHED PRODUCT:
CHRISTMAS ORNAMENT multilayer layout size (finished product): 3,6 x 4,4 in.
You can easily change the size of the product.
Number of layers: 3.
!!! This design has engraving!!!
Recommended material - Plywood, MDF, Acrylic, Plexiglas, Metal, Cardboard, Paper.
Recommended Material Thickness for Wood - 3 - 6 mm (1 / 12in - 1 / 4in).
Instruction
1
Step1: Using xTool Creative Space Preview
Preview

Switch on the machine, open xTool Creative Space on your computer, drag in the required XCS file, 300*600*3mm Plywood board into the machine, refresh the page, click on ranging, adjust the parameters, and get ready for cutting. When using the S1 machine, you need to turn on the air pump to prevent the board from yellowing and discoloring during laser cutting.

RED LAYER

  1. Make sure you opened "Layer and Object List” by clicking on the Icon on the bottom left of the screen.
  2. Select the red layer (this layer contains the path for engraving).
  3. Set the processing type of the red layer to Engrave. 
  4. Click on “EasySet panel” to open the power and speed settings for the selected layer.
  5. Set the Power (S1-20w: 60) 
  6. Set Speed (S1-20w: 180) 
  7. Set Number of Passes (S1-20w: 1)
  8. Line per cm (S1-20w: 120)

BLACK LAYER

  1. Make sure you opened "Layer and Object List” by clicking on the Icon on the bottom left of the screen.
  2. Select the black layer (this layer contains the path for cutting).
  3. Set the processing type of the black layer to Cut. 
  4. Click on “EasySet panel” to open the power and speed settings for the selected layer.
  5. Set the Power (S1-20w: 100) 
  6. Set Speed (S1-20w: 5) 
  7. Set Number of Passes (S1-20w: 1)
2
Step2: After cutting
Preview
Preview

After cutting you have 2 layers.

You should glue all the layers of this decorative together.

You can paint before gluing.

3
Step3: Done
Preview

Now you can decorate your home with this cute Christmas Ornament!

Comments
Remixes
xTool Supplies Used in This Template
xTool S1
xTool S1
3mm Basswood Plywood
3mm Basswood Plywood

License

CC BY-NC