HomeTemplatesDecorSeasonal & Themes DecorHolidays Decor
LaserBuildLab
Report
Laser cut and engrave
Project made with xTool S1 machine for Christmas.
Project made with xTool S1 machine for Christmas.
Laser cut and engrave
Project made with xTool S1 machine for Christmas.
Laser cut and engrave
Laser cut and engrave
Laser cut and engrave
Laser cut and engrave
Laser cut and engrave

Wooden Christmas Ornament with Gingerbread man

Instruction
WoodenChristmasOrnamentwithGingerbreadman.xcs
WoodenChristmasOrnamentwithGingerbreadman
.xcs
Application scenario
Laser processing (20min)
Machine & module
xTool S1
20W
Compatibles · 9
Material used
3mm Basswood Plywood
794
3666
Information
      Bring a touch of nostalgia to your Christmas tree with this beautifully crafted wooden ornament. The intricate laser-cut design features a smiling gingerbread man holding a candy cane, surrounded by festive holly and berries. Crafted from high-quality 3mm plywood or MDF, this ornament is a timeless addition to any holiday decor.

Key features:
Family-friendly: A fun and engaging activity for the whole family.
Classic design: Features timeless Christmas elements.
Perfect for: Gifts and home decor.

For your convenience, the downloadable zip folder contains files of different formats such as: .AI, .SVG, .DXF, .DWG, .CDR, .EPS, .PDF and .XCS formats.
Instruction
1
Step1: Using xTool Creative Space
Preview

Switch on the machine, open xTool Creative Space on your computer, drag in the required xcs file, 300*600*3mm Plywood board into the machine, refresh the page, click on ranging, adjust the parameters, and get ready for cutting. When using the S1 machine, you need to turn on the air pump to prevent the board from yellowing and discoloring during laser cutting.

RED LAYER

  1. Make sure you opened "Layer and Object List” by clicking on the Icon on the bottom left of the screen.
  2. Select the red layer (this layer contains the path for engraving).
  3. Set the processing type of the red layer to Engrave. 
  4. Click on “EasySet panel” to open the power and speed settings for the selected layer.
  5. Set the Power (S1-20w: 60) 
  6. Set Speed (S1-20w: 180) 
  7. Set Number of Passes (S1-20w: 1)
  8. Line per cm (S1-20w: 120)

BLACK LAYER

  1. Make sure you opened "Layer and Object List” by clicking on the Icon on the bottom left of the screen.
  2. Select the black layer (this layer contains the path for cutting).
  3. Set the processing type of the black layer to Cut. 
  4. Click on “EasySet panel” to open the power and speed settings for the selected layer.
  5. Set the Power (S1-20w: 100) 
  6. Set Speed (S1-20w: 5) 
  7. Set Number of Passes (S1-20w: 1)
2
Step2: After cutting

After cutting, we have four elements in each toy. 

You just need to assemble them as shown in the video.

3
Step3: Done
Preview

Now you can enjoy the wonderful atmosphere of the Christmas Ornament.

Comments
Remixes
xTool Supplies Used in This Template
xTool S1
xTool S1
3mm Basswood Plywood
3mm Basswood Plywood

License

CC BY-NC