Report
![[Laser cut and engrave] Wooden coaster with fish design and 'I'd rather be fishing' text](https://image-res.xtool.com/resource/xtool/community/attachment/xtool-community/9a169dfb-9342-4d92-a4d2-c72ec80d1070?x-oss-process=image/resize,w_1200,h_900,limit_0/interlace,1/format,webp/auto-orient,1)
Wooden coaster with fish design and 'I'd rather be fishing' text
InstructionI'dratherbefishingbass
.svg
Application scenario
Laser processing (5min)
Machine & module
xTool D1 Pro
10WMaterial used
Live Edge Ash Round
169
716
Information
Wood Coaster for our fishing friends.
Instruction
1
Step1: Size image and engrave
Size the SVG depending on the piece you are using.
Settings for the project are based off of an ash hardwood slice, if using a softer wood, you can increase the speed to about 100 mm/s.
After engraving, give the coaster a light sand with 220 grit sandpaper on a sanding block, then blow or wipe the dust away.
We use a triple thick polyurethane to coat the coaster and protect it from water damage.
Comments
